AB羅克韋爾1756-DNB
|
Suitable for safety functions
|
Yes
|
|
With optical interface
|
No
|
|
Supporting protocol for TCP/IP
|
No
|
|
Supporting protocol for DeviceNet
|
Yes
|
|
Supporting protocol for other bus systems
|
No
|
|
Redundancy
|
No
|
|
IO link master
|
No
|
|
Supporting protocol for DeviceNet Safety
|
Yes
|
|
Supporting protocol for EtherNet/IP
|
No
|
|
Power dissipation
|
3.5 W
|
|
Thermal dissipation
|
11.9 BTU/h
|
|
Enclosure type rating
|
None (open-style)
|
|
Number of nodes, max
|
64 nodes
|
|
DeviceNet current draw
|
60 mA @ 24V DC
|
|
Current draw
|
400 mA @ 5.1V DC, 0 mA @ 24V DC
|
|
Wiring category
|
1 - On DeviceNet ports, 3 - On USB ports
|
|
Communication rate
|
125 Kbps (500 m max), 250 Kbps (250 m max), 500 Kbps (100 m max)
|
|
Isolation voltage
|
50V (continuous), basic insulation type, DeviceNet network to backplane, Type tested at 853V AC for 60 s, No isolation between USB and backplane,
|
|
Supporting protocol for LON
|
No
|
|
Supporting protocol for ASI
|
No
|
|
Supporting protocol for PROFIBUS
|
No
|
|
Supporting protocol for CAN
|
No
|
|
Supporting protocol for INTERBUS
|
No
|
|
Supporting protocol for KNX
|
No
|
|
Supporting protocol for Modbus
|
No
|
|
Supporting protocol for Data-Highway
|
No
|
|
Supporting protocol for SUCONET
|
No
|
|
With potential separation
|
No
|
|
Supporting protocol for SERCOS
|
No
|
|
Supporting protocol for INTERBUS-Safety
|
No
|
|
Radio standard Bluetooth
|
No
|
|
Radio standard Wi-Fi 802.11
|
No
|
|
Supporting protocol for AS-Interface Safety at Work
|
No
|
|
Supporting protocol for Foundation Fieldbus
|
No
|
|
Supporting protocol for PROFINET CBA
|
No
|
|
Supporting protocol for PROFINET IO
|
No
|
|
Supporting protocol for PROFIsafe
|
No
|
|
Supporting protocol for SafetyBUS p
|
No
|
|
Radio standard GPRS
|
No
|
|
Radio standard GSM
|
No
|
|
Radio standard UMTS
|
No
|
|
Slot width
|
1
|
|
DeviceNet connector torque
|
0.56 Nm
|
|
DeviceNet voltage range
|
11...25V DC CL 2/SELV
|
|
DeviceNet port
|
1 DeviceNet open-style 5- or 10-pin linear plug
|
|
DeviceNet power
|
To comply with the CE low voltage directive (LVD), the DeviceNet network must be powered from a source compliant with the safety extra low voltage (SELV) or protected extra low voltage (PELV). To comply with UL restrictions, the DeviceNet network must be
|
|
Surrounding air temperature, max
|
60 °C
|
|
Emissions
|
CISPR 11: Class A
|
|
Vibration
|
2 G @ 10...500 Hz
|
|
ESD immunity
|
6 kV contact discharges, 8 kV air discharges
|
|
EFT/B immunity
|
±3 kV at 5 kHz on DeviceNet ports
|
|
Relative humidity
|
5...95% noncondensing
|
|
Shock
|
Operating: 30 G, Non operating: 50 G
|
|
Conducted RF immunity
|
10Vrms with 1 kHz sine-wave 80% AM from 150 kHz...80 MHz
|
|
Surge transient immunity
|
±2 kV line-earth (CM) on ControlNet ports
|
|
Operating temperature
|
0 to 60 °C
|
|
Radiated RF immunity
|
10 V/m with 1 kHz sine-wave 80% AM from 80...2000 MHz, 10 V/m with 200 Hz 50% Pulse 100% AM @ 900 MHz, 10 V/m with 200 Hz 50% Pulse 100% AM @ 1890 MHz, 3 V/m with 1 kHz sine-wave 80% AM from 2000...2700 MHz
|
|
Storage temperature
|
-40 °C
|
|
North American temperature code
|
T4A
|
|
IEC temperature code
|
T4
|
|
Module location
|
Chassis based, any slot
|
